Included below are the (click on item): Airbike, Airplane Stuff, Aventura Sea Plane, Backyard Flyer, Bearhawk Project, Bensen B8-M gyroplane, Cessna 120, Cessna 150 taildragger, Cessna 172-M, Cessna 172 Skylane, CGS Hawk project , Continental O-300D Engine, Dragonfly Project, Jungster 1, Osprey 2, Pietenpol Blueprints, Powered Parachute, Pulsar II, Quicksilver MX Sprint, RV-4, RV-6A, Skyboy, Skyote Biplane, Smith Miniplane
This is the page where we have things that you can buy from our members or friends of our members.
There are all kinds
of things here, so visit often!
Also, Please let sellers know where you saw their ad!
Last Updated: 04/27/17@0907EDT
|HKS 700 E engine - purchased 2009
Quicksilver MX Sprint
The owner had medical issues so he wants to sell this ultralight which he has flown regularly.
Wing Span 18'- 1”
Wing Area 156 SF Length 18'- 1”
Empty Weight 250 lbs. (true ultralight!)
Gross Weight 525 lbs.
Engine: Rotax 447
Fuel capacity: 5 U.S. gallons
Takeoff distance 50' obstacle: 200 feet
Takeoff distance, ground roll: 65 feet
Rate of climb: 900 ft/min
Landing distance: 200 feet
Landing distance ground roll: 50 feet
Maximum level speed: 54 mph
Also included with sale is a Rotax 503 engine that needs servicing/rebuilding.
Asking $4500 OBO
Call owner at: 803-292-2235 (Cell) for questions or more information. Project is in a covered hangar at a private airstrip near Blythe, Georgia.
Dragonfly MKIII Project
2 Place - Canard Winged – Single Engine
Wing Span 21'- 10” Front 22'
Wing Area 102 SF Length 15'- 8”
Empty Weight 611.5 lbs. Gross Weight 1,250 lbs.
Limiting Speed 200 Kts
Original Design By Viking Aircraft Co.
Engine Porshe 911 – 2275cc about 60 hrs. TT
This aircraft is to be sold as a parts "short-term" project. The main work that must be completed before flight will be to overhaul the engine and install a dual magneto. The previous owner indicated that the airframe has a total of 60 hours of flight time. The condition of the airplane appears to be in very good condition in and out.
Located at a private airstrip near Keysville, Georgia in an enclosed hangar with wings off.
ASKING: $10,000 OBO
Contact Russell Thies
Phone number: 706-860-5785 8:00 AM - 10:00 PM
|FOR SALE: Skyote Biplane N476A New
Plans built open cockpit Skyote designed by Pete Bartoe, Phase 1 &
2 Completed, Lycoming 0-235 engine rebuilt by Dons Dream Machines,
Aymar-Demuth Prop, Poly Fiber covering and paint, Micro-Air transceiver
and transponder, 15 gals fuel, Spin on oil filter, we are selling due
to owners age. • Contact Fred L. Houston - DUBLIN AIR SERVICE, INC.,
Broker - located Dublin, GA USA • Telephone: 478-290-4649 .
478-275-0029 . 478-275-8789 • Fax: 478-275-1352
Or contact Glenn Bridges
Phone number: 478-275-0200
|FOR SALE: 1975 Cessna 172-M
915 hours TTAE
Too many projects and not enough time !
ASKING: $48,000 (invested)
Contact Juan Hill
|FOR SALE: Skyboy
Registered ELSA, Factory Built. Rotax 912, 80 HP 250 hrs on airframe & engine, wingtip strobes Microair in dash transceiver with intercom.
Flys hands off !
Located Edgefield County Airport - Trenton, South Carolina.
Contact Johnny Anderson
937 Waterloo Dr.
Lexington, VA 24450-6436
Phone numbers: 803-279-4138 or
|FOR SALE: RV6-A
1997 RV6A, SLIDER, TT 546 , Lycoming 0-360 TT 546, Prince prop 546, NAVAID Autopilot w/coupler, Garmin 196, King 125 coupled, PM1000 intercom, EDC 502 transponder, 2 Telex headsets, Electric flaps w/mag G-7 stick grip, SR8A engine analyzer CHT & EGT, Carb temp/outside air, volt/amp, oil pressure/temp, low oil pressure indicator light, electric boost pump, electric and manual elevator trim w/ trim gauge.
This aircraft has had the new nose gear modification, tires are like new, Gel battery new 2008, custom main gear jack, canopy cover, canopy curtain. Paint would be considered "9", Classic AERO seats "7", and many other extras. This plane has always been hangared and professionally maintained by certified mechanics and comes with a fresh ANNUAL TO BE COMPLETED AT THE TIME OF PURCHASE. I'm selling this plane because of health problems.
Asking $59,000Contact Dean A. Wilt, Macon, MO.
|FOR SALE: Backyard Flyer
As president of EAA Chapter 1171 here in New Bern, NC, I have had the pleasure of meeting lots of great people: aviators, people who just love aviation, people who support general aviation, and the people who love these people. But recently, I have had the honor of meeting Peggy Martin of LaGrange, NC. What a wonderful character. Peggy has asked me to help sell her beloved husband Billy's BACKYARD FLYER. Tragically, Billy fell ill shortly after delivery of his plane and has passed away. Peggy would like to sell the plane to someone who will love and fly it. She will sell it for just what she has in it: $30,000.
Now before you start wondering where the 'hitch' is, let me tell you I would have bought it in the first 15 minutes I saw it if I could. It is only upcoming surgery that keeps me from it…and truthfully, I haven't given up totally.
Here is the link to an ad by the folks who built it: http://www.valleyengineeringllc.com/for-sale.php
Contact Terry Deeb
The prototype Back Yard Flyer two-placeTHIS IS IT in Peggy's yard:
is for sale.
$30,000 with enclosed 24 foot UXT Trailer.
Aircraft was flown and shown at Oshkosh 2007. Aircraft was pictured in the October, 2007 issue of sport pilot magazine.
Pierre Smith writes that a local friend of his has his Cessna 120 for sale pretty cheap......$16,000 with about 800 SMOH on the C-85 Continental. It has good fabric and is fairly clean and has no damage history according to the owner.
The airplane's located at the Louisville airport (2J3).If you are interested or know someone who is, Pierre's phone number is: 478-625-3586; e-mail: firstname.lastname@example.org
THIS AD NEW 07/08/09
BACK TO THE TOP
|FOR SALE: Jungster 1 N3243
-- 115 hp. Lycoming 0235-C1.
-- 225 hours TTAF & SMOH.
-- Electric starter.
-- Cleveland wheels & brakes.
-- Always hangared and well maintained.
-- Current annual - detailed logs.
Contact Marc Phone: 706-678-2387;
The owner of the project writes that he has a Cessna 172 that's taking up all of his time. So he is reluctantly selling his project. All he wants is the material cost he has put into it. It includes:
---- The plans - Serial #300.
---- One wing, spars and center ribs; is framed with clecos.
---- The other two wing spars are clecoed together.
---- All the ribs and spars are made for ailerons and flaps.
Asking $4000 (what he has in it).
The project is located on Bascom Rd. in Sylvania, Georgia.
Contact Juan Hill at: (912) 564-2886.
Completed Wing Frame
(click photos to enlarge)
Note that magazine articles call the Bearhawk a 140-155 mph STOL; four place, 160-260 hp, metal wing, tubing fuselage, 50 gallon fuel; 1100-1300 lbs useful weight; big baggage doors; tail dragger.Official Bearhawk Website: BEARHAWK
|FOR SALE: 1958 CESSNA 172 SKYLANE
- CONTINENTAL O-470
- Engine rebuilt and has 750 hours SMO.
- Has only 150 hours since six rebuilt cylinders put on it.
- Prop restored when the engine was overhauled.
|- Bendix ADF-T-12C
- Apollo II 612B Transponder
- Nice interior.
- It does have wheel pants for the mains. They were taken off since I land at times on a sod airstrip.
- Yellow & black. Does need paint job.
ASKING ONLY $45,000 OBO! Contact Jack Jones
|FOR SALE: 1997Aventura II Seaplane With a Rotax 582. 200 hours. Electric start. Kevlar Hull. Always hangared.
Electric flaps; BRS 1200; bilge pump; luggage rack; clear coat kit; brakes;
12 gallon fuel tank; new sails in 1999. Instruments include: hour meter,
water temperature, air speed, altimeter, VAS, tach, EGT, CHT. Asking $16,000.
Contact Larry Purcell (912) 925-8279 [Savannah, GA].
E-mail Puredbaron@aol.com .
|Continental O-300-D lower side
||Continental O-300-D bottom & frame
FOR SALE: Bensen B-8M gyrocopter.
It has a basic Bensen B-8M frame which has been white powder-coated;
it has 23 ft. Dragon Wing rotor blades, a 3 bladed 60 inch Ivoprop,
a Rotax 503 engine, custom streamlined designed instrument pod with compass,
Alt, ASI, VSI, Dual EGT, Dual CHT, Tach, Landing light, Engine primer,
and a Wunderlich prerotator. It comes with a trailer. All for
$13,995 price reduced, now only $12,900!
Contact: George Hammack 803-652-7437 for information or by e-mail email@example.com
Ad updated 11/21/10